Table of Contents
Advertisement
Chapter 6
Running the Quick Data Acq Application
110
To run the Quick Data Acq application, perform the following steps:
1.
If you have not already done so, power up your computer and
any attached peripherals.
2.
Select Quick Data Acq from the Data Translation, Inc\Quick
Data Acq program group.
Note: The Quick Data Acq application allows you to verify basic
operations on the board; however, it may not support all of the
board's features.
For information on each of the features provided, use the online help
for the Quick Data Acq application by pressing F1 from any view or
selecting the Help menu. If the system has trouble finding the help
file, navigate to C:\Program Files\Data Translation, Inc\
Quick Data Acq\Qkdataacq.hlp, where C: is the letter of your hard
disk drive.
For detailed information on the supported features of the board,
refer to the DT3010 Series User's Manual (see
on viewing this manual).
page 11
for information
Advertisement
Table of Contents
