04/13 Rev. 5.07-00
Safety instructions
Information and qualifications
Ensuring the
necessary qualification
propriately qualified personnel.
electricians.
defined and consistently observed.
Qualification for
Knowledge required to install the print dispenser and perform service work must be
system integrators and
demonstrated through appropriate qualification. Only service personnel with technical
service technicians
training are able to assess the tasks to be performed and recognise potential dangers.
Tasks
Install the machine
Connect
Make settings
Switch on/off
Insert/change material/ribbon
Application-related settings
Rectify minor operating faults
Clean the machine
Rectify major operating faults
Settings to the electronics/ mechanics
Repairs
Manual:
[Tab. 1] An example of the distribution of tasks among different qualified personnel.
a)
For example faults when detecting labels
b)
For example incorrect labelling
SERVICE-HANDBUCH
Let the installation, setup and repair of the machine only be accomplished by ap-
Let intallation and service work at the machine only be accomplished by qualified
Areas of responsibilities for operating and servicing the machine must be clearly
• Knowledge acquired through technical training in mechanics and electronics (for
example in Germany the training to become a mechatronics engineer).
• Participation in a technical training course for the corresponding label dispenser
offered by the manufacturer.
• The service personnel must be acquainted with the functionality of the label dis-
penser.
• The system integrator must be acquainted with the functionality of the of the sys-
tem into which the label dispenser is being integrated.
System integrator
a
b
Installation manual,
Service manual
ALX 73x
Operator
X
X
X
X
X
X
X
X
X
X
X
X
Operating
Manual
Service technician
X
X
X
X
X
X
X
X
Service manual, spare
parts catalogue
7