Notes On Installation And Repair Work - Novexx Solutions ALX 73 Series Service Manual

04/13 Rev. 5.08-02

Notes on installation and repair work

General information
Before performing any maintenance or repair work:


Electro-static discharge:

discharge, e.g. wear an anti-static arm band.
Tools:



toothed screw (Torx) with a hexagon socket driver.
Rubber and plastic parts:

with grease, petrol, benzene, kerosene or mineral oil.
Environmental

protection
material.

containers. Never allow them to enter the sewerage system or to seep into the ground.

waste. Dispose of them in an eco-friendly manner.
Packaging materials:
Only recyclable materials are used for packaging the machine.

Eco-friendly disposal:



or



SERVICE MANUAL
Block access to the working area of the machine to unauthorised persons.
Post a notification sign, which calls attention to the work.
When the casing is open, protect the electronics from damage due to electro-static
Only use suitable tools.
Ensure all tools are at hand before beginning the work.
Do not attempt to improvise or to use improper tools, e.g. loosening an interior-
Do not allow hoses, seals, and other rubber or plastic parts to come into contact
Avoid unnecessary waste, e.g. use cleaning cloths sparingly and reuse packing
Only store operating materials, such as fresh or used cleaning agents, in suitable
Do not put old batteries, removed parts, and used cleaning agents in household
Dispose of unwanted packaging material in an eco-friendly manner.
Sort the waste as much as possible, e.g. separate metals from plastics.
Avoid contaminating the waste if possible.
Drop off the waste at the collection points provided for that purpose
Have the waste collected by suitable recycling agencies.
Use any on-site options.
Observe all relevant rules, ordinances, and laws.
ALX 73x
4
General information