Horizontal Stabilizer Installation - H-KING MX2 Extreme 4S EP0 Instruction Manual

ASSEMBLY INSTRUCTIONS:

Horizontal Stabilizer Installation.

Apply a thin coat of foam safe glue to the stabilizer mid-section and gently slide it into place as shown.
Check frequently if the stabilizer is level and square to the fuselage as the glue dries.
A small piece of white foam comes with the
fuselage. Apply some foam safe glue and place
into the slot between the lower part of the rudder
post and the rear of the fuselage to further
reinforce the structure of the empennage.
4