Advertisement
Quick Links
Advertisement
Related Manuals for H-KING Crusader 30E
Summary of Contents for H-KING Crusader 30E
- Page 1 Instruction Manual...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS 1. Please read this manual carefully and follow the instructions of the manual before you use this products. 2. Our airplane is not a toy, which is only suitable for experienced pilot. Or if you are a novice pilot, please operate under the guidance of an experienced pilot. - Page 3 1. Install both wheel axles on the landing gear. Tightened it with the supplied nyloc-nut. Then install both wheels on the axles. Use the supplied collar and apply loctite glue to the grub screws and lock the wheels in place. Use the supplied screws to secure the main gear onto the fuselage as shown.
- Page 4 2. Install the aileron strips on the main wing. Apply a few drops of CA glue to secure the strips into place. 3. Install servos onto the wing servo pocket. Hook up the control linkages to the control surfaces. Apply glue to the control horn and stick it on the aileron strip.
- Page 5 4. Install the main wing onto the fuselage. Use the supplied socket head screws to lock it into place 5. Install the elevator to the stabiliser as shown. Note: You may first align the elevator and stabiliser carefully with minimal gaps in between the two. Once you are satisfied with the setup, apply CA glue to the hinge and let dry.
- Page 6 6. Install the tail gear into the mounting plate as shown. Then use the supplied screws and install the stabiliser onto the fuselage with the tail gear assemmbly in place.
- Page 7 7. Install the vertical fin and simultaneously insert the tail wheel steering control arm into a slot on the rudder as shown. Apply epoxy glue to the tail fin and let it dry. Note: Ensure the empennage is true and square to the wing when install.
- Page 8 9. Install you desired brushless motor onto the motor mount as shown. The motor thrust line should be 2 degrees to the right and 2 degrees down to counteract the motor torque and pitching up when apply power vigourously.
- Page 9 10. Done!
- Page 10 C of G 90mm from the wing's leading edge. C of G 90mm Recommend control throws: Rudder: 20mm L/R Elevator: 10mm up/down Aileron: 8mm up/down Rudder 20mm 20mm Elevator 10mm 10mm Aileron...
-
Page 11: Control Direction Test
Control Direction Test...
Need help?
Do you have a question about the Crusader 30E and is the answer not in the manual?
Questions and answers