Figure 12. Processor Package Placement Diagrams; Figure 13. Top Plate And Cpu Fan Placement Diagrams; Figure 14. Seating Spring Assemblies - Intel Atom C2000 Getting Started Manual

System Setup and Installation
Figure 12. Processor Package Placement Diagrams
Top Plate and CPU Fan Placement:
a.
b.
Figure 13. Top Plate and CPU Fan Placement Diagrams
Seating the Spring Assemblies
a.
b.
c.
d.
Figure 14. Seating Spring Assemblies
Getting Started Guide
Place the top Plate Assembly on top of the Package with the notch aligned with pin1.
Lightly tighten each of the Barrel nuts until each Barrel nut has engaged with the
plungers.
Tighten the Barrel nuts in an X pattern as shown below ¼ turn each.
Repeat the ¼ turn tightening sequence until the Barrel nuts seat on the plunger top.
To verify that the Barrel nuts are seated properly, torque the assemblies to
3.5 to 4 in-lbs of torque.
25