3.5-Inch Hard Drive; Removing The 3.5-Inch Hard Drive - Dell OptiPlex Small Form Factor Plus 7020 Owner's Manual

Figure 8. Installing the front bezel
Steps
1. Insert the tabs on the right side of the bezel into the corresponding slots on the chassis.
2. Push the left-side of the front bezel towards the side cover, snapping the tabs into position.
Next steps
1. Install the side cover.
2. Follow the procedure in

3.5-inch hard drive

Removing the 3.5-inch hard drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the 3.5-inch hard drive assembly and provide a visual representation of the removal
procedure.
44 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.