Control Modes - SHOWTEC Helix M1100 Q4 Mobile User Manual

Helix M1100 Q4 Mobile

Control Modes

The Helix M1100 Q4 Mobile can be operated with a DMX controller, or without a DMX controller as a
stand-alone device or in a master/slave setup.
The Helix M1100 Q4 Mobile supports the following control modes:
● Stand-alone:
● Master/Slave:
● DMX-512:
For more information about how to connect the devices, refer to 5. Setup on pages 22–27.
To operate the device manually as a stand-alone device or in a master/slave setup:
01) Adjust the intensity values for the colors. See 6.8.2. Manual Mode on page 35 for more information.
In auto operation mode you can run the auto program:
01) Select the auto program. See 6.8.3. Auto Mode on page 35 for more information.
In Program Mode 01 you can select one of 33 static colors. To run this program:
Select Program Mode 01 in the Program menu.
02) Select one of the 33 static colors. See 6.8.4.1. Program 01 / Static colors on page 36 for more
information.
03) Add strobe effect. See 6.8.4.1. Program 01 / Static colors on page 36 for more information.
In Program Mode 02-16 you can select one of the built-in programs. To run one of the built-in programs:
Select Program Mode 02-16 in the Program menu.
Select one of the 15 built-in chases. See 6.8.4.2. Program 02-16 on page 36 for more information.
03) Add strobe effect or adjust the chase speed. See 6.8.4.2. Program 02-16 on page 36 for more
information.
To operate the device with a DMX controller:
01) Select DMX or W-DMX mode in the DMX menu. See 6.8.1.3. DMX Signal on page 34 for more
information.
02) Set the DMX starting address of the device in the DMX Address menu. See 6.8.1.1. DMX Address on
page 33 for more information.
03) Select the DMX channel mode in the DMX Configuration menu. See 6.8.1.2. Channels on page 34 for
more information. See 6.9. DMX Channels on pages 43–44 for complete overview of all DMX
channels.
Product code: 43750
Manual operation mode, auto operation mode (auto programs), built-in
programs
Manual operation mode, auto operation mode (auto programs), built-in
programs
3 channel modes (4, 6 and 10 channels)
29