Table of Contents
Advertisement
Helix M1100 Q4 Mobile
Control Panel
●
Use the MODE button to open the main menu or to exit the current submenu and return to the main
menu.
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the SET button to open the desired menu, to confirm your choice or to set the currently selected
value.
Start-up
Upon start-up the display shows the start screen. The start screen provides information about the software
version, the temperature of the LEDs, the DMX starting address of the device, and the selected DMX
channel mode:
Note:
If no button is pressed, after 30 seconds of inactivity the display will turn off. To unlock the display, you
have to press and hold down the MODE and SET buttons for 3 seconds. Once you have pressed the
buttons, the display will light up.
Product code: 43750
A) Battery (charging) LED indicator
B)
OLED display
C) UP button
D) SET button
E)
DOWN button
F)
MODE button
G) W-DMX LED indicator
H)
Battery (full) LED indicator
Fig. 21
30
Advertisement
Table of Contents
