Related Manuals for SHOWTEC 437 49
Summary of Contents for SHOWTEC 437 49
- Page 1 USER MANUAL ENGLISH Helix M1100 Q4 Mobile Product code: 43749 Firmware version: 3.1 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Helix M1100 Q4 Mobile Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Helix M1100 Q4 Mobile Table of contents Introduction ................................4 Before Using the Product ..........................4 Intended Use ............................... 4 Product Lifespan ..............................4 LEDs Lifespan ............................... 4 Text Conventions ..............................5 Symbols and Signal Words ..........................5 Symbols on the Information Label ........................6 Safety .................................. - Page 4 Helix M1100 Q4 Mobile Menu Overview ..............................34 Main Menu Options ............................36 DMX Settings ..............................36 DMX Address ............................36 Channels ..............................37 DMX Signal ............................37 CRMX Unlock ............................37 Manual Mode .............................38 Auto Mode ..............................38 Built-in Programs Mode ..........................39 Program 01 / Static Colors ........................39 Program 02–16 ............................39 Slave Mode ..............................40 Settings ................................40...
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec Helix M1100 Q4 Mobile ● Schuko to Power Pro True cable (1,5 m) ● 1 x safety cable ●... -
Page 6: Text Conventions
Helix M1100 Q4 Mobile Text Conventions Throughout the user manual the following text conventions are used: ● Buttons: All buttons are in bold lettering, for example “Press the UP/DOWN buttons” ● References: References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. -
Page 7: Symbols On The Information Label
Helix M1100 Q4 Mobile Symbols on the Information Label This product is provided with an information label. The information label is located on the mounting bracket of the device. The information label contains the following symbols: This device shall not be treated as household waste. Read and follow the instructions in the user manual before installing, operating or servicing the device. -
Page 8: Safety
Helix M1100 Q4 Mobile Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions DANGER Danger for children For adult use only. - Page 9 Helix M1100 Q4 Mobile DANGER Electric shock caused by short-circuit This device falls under IEC protection class I. ● Make sure that the device is electrically connected to ground (earth). Connect the device only to a socket-outlet with ground (earth) connection. ●...
- Page 10 Helix M1100 Q4 Mobile Attention General safety ● Do not connect the device to a dimmer pack. ● Do not switch the device on and off in short intervals. This decreases the device’s life. ● Do not shake the device. Avoid brute force when installing or operating the device. ●...
-
Page 11: Requirements For The User
Helix M1100 Q4 Mobile Requirements for the User This product may be used by ordinary persons. Maintenance may be carried by ordinary persons. Installation and service shall be carried out only by instructed or skilled persons. Contact your Highlite International dealer for more information. Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled person, for specific tasks and work activities associated with the installation, service and maintenance of this product, so that they can identify risks and take precautions to avoid them. -
Page 12: Description Of The Device
Description of the Device The Showtec Helix M1100 Q4 Mobile is a battery powered 8 x 10 W RGBW LED Wash with IP65 rating. The device can be controlled via CRMX (wireless), DMX, Master/Slave, Manual, and Auto mode with many built-in programs. -
Page 13: Bottom View
Helix M1100 Q4 Mobile Bottom View Fig. 03 08) Protective valve 09) 2 x Quick-lock 10) Power switch ON/OFF (for battery operation) Note: Press this switch for the light output to be visible. The current from the built-in battery is responsible for the light output. -
Page 14: Product Specifications
Helix M1100 Q4 Mobile Product Specifications Model: Helix M1100 Q4 Mobile Electrical: Input voltage: 100–240 V AC, 50/60 Hz Power consumption: 75 W Physical: Dimensions: 367 x 126 x 307 mm mm (L x W x H) (including bracket) Weight: 7,9 kg Optics: Light source:... -
Page 15: Dimensions
Helix M1100 Q4 Mobile 3.5. Dimensions Fig. 04 Fig. 05 Product code: 43749... -
Page 16: Installation
Helix M1100 Q4 Mobile Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. Personal Protective Equipment During installation and rigging wear personal protective equipment in compliance with the national and site-specific regulations. - Page 17 Helix M1100 Q4 Mobile Fig. 06 Fig. 07 Product code: 43749...
-
Page 18: Installing The Barndoor (43742)
Helix M1100 Q4 Mobile Installing the Barndoor (43742) You can attach a barndoor to the device. To install the barndoor to the device: 01) Pull both spring-loaded locking pins on the barndoor, to unlock on the spring-loaded locking mechanism. Fig. 08 02) Put the barndoor on the device, as shown in Fig. - Page 19 Helix M1100 Q4 Mobile Fig. 10 Product code: 43749...
-
Page 20: Installing The Tophat (43741)
Helix M1100 Q4 Mobile Installing the Tophat (43741) You can attach a tophat to the device. To install the tophat to the device: 01) Pull both spring-loaded locking pins on the tophat, to unlock on the spring-loaded locking mechanism. Fig. 11 02) Put the tophat on the device, as shown in Fig. - Page 21 Helix M1100 Q4 Mobile Fig. 13 Product code: 43749...
-
Page 22: Rigging
Helix M1100 Q4 Mobile Rigging The device can be positioned on a flat surface or mounted to a truss or other rigging structure in any orientation. Make sure that all loads are within the pre-determined limits of the supporting structure. If the device is mounted overhead, it should always be secured with a safety cable or another secondary suspension. -
Page 23: Angle Adjustment
Helix M1100 Q4 Mobile Angle Adjustment You can adjust the angle of the device with the 2 adjustment screws (02). Turn the adjustment screws (02) counterclockwise to release them. 02) Tilt the device at the desired angle (see Fig. 15). 03) Turn the adjustment screws (02) clockwise to tighten them. -
Page 24: Charging The Battery
Helix M1100 Q4 Mobile Charging the Battery DANGER Risk of explosion caused by incorrect handling This device contains a built-in rechargeable lithium-ion battery. The battery is not replaceable. The battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures. ●... -
Page 25: Connecting To Power Supply
Helix M1100 Q4 Mobile Connecting to Power Supply DANGER Electric shock caused by short-circuit The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other voltage or frequency to the device. This device falls under IEC protection class I. Make sure that the device is always electrically connected to the ground (earth). -
Page 26: Setup
Helix M1100 Q4 Mobile Setup Warnings and Precautions DANGER Electric shock caused by short-circuit This device is IP65 rated. ● Do not expose the device to conditions that exceed the rated IP class conditions. ● Keep the connectors sealed with the rubber caps when the connectors are not in use. ●... -
Page 27: Dmx Cables
Helix M1100 Q4 Mobile DMX Cables Shielded twisted-pair cables with 5-pin XLR connectors must be used for reliable DMX connection. You can purchase DMX cables directly from your Highlite International dealer or make your own cables. If you use XLR audio cables for DMX data transmission, this may lead to signal degradation and unreliable operation of the DMX network. -
Page 28: Dmx Linking
Helix M1100 Q4 Mobile DMX Linking To connect multiple devices on one DMX data link, follow the steps below: 01) Use a 5-pin DMX cable to connect the DMX OUT connector of the lighting controller to the DMX IN connector of the first device. 02) Connect the first device’s DMX OUT connector to the second device’s DMX IN connector with a 5-pin DMX cable. -
Page 29: Multiple Helixes (Wireless Dmx Control)
Helix M1100 Q4 Mobile Multiple Helixes (Wireless DMX Control) You can use the Helix in a wireless DMX setup. Make sure the device is operating in wireless DMX mode, which can be set in the main menu (see 6.8.1.3. DMX Signal on page 37 for more information). LumenRadio 2.4GHz Wireless Communication Module Communication distance: depending on the transmitting power or transmitter module... -
Page 30: Connect The Helix To The Wireless Dmx Signal Transmitter
Helix M1100 Q4 Mobile Connect the Helix to the Wireless DMX Signal Transmitter The Helix cannot actively match a random wireless signal transmitter. To pair the Helix with the wireless signal transmitter, please check the manual of the wireless signal transmitter you use. -
Page 31: Setup Example 2
Helix M1100 Q4 Mobile Setup Example 2 Connect the Helix to the wireless DMX signal transmitter The Helix M1100 Q4 Mobile cannot actively search for wireless signal transmitters. To pair the Helix with the wireless signal transmitter, please check the manual of the wireless signal transmitter you use. -
Page 32: Operation
Helix M1100 Q4 Mobile Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is intended for professional use as an outdoor wash. It is not suitable for households and for general lighting. -
Page 33: Control Modes
Helix M1100 Q4 Mobile Control Modes The Helix M1100 Q4 Mobile can be operated with a DMX controller, or without a DMX controller as a stand-alone device or in a master/slave setup. The Helix M1100 Q4 Mobile supports the following control modes: ●... -
Page 34: Control Panel
Helix M1100 Q4 Mobile Control Panel A) Battery (charging) LED indicator OLED display C) UP button D) SET button DOWN button MODE button G) CRMX LED indicator Battery (full) LED indicator Fig. 21 ● Use the MODE button to open the main menu or to exit the current submenu and return to the main menu. -
Page 35: Menu Overview
Helix M1100 Q4 Mobile Menu Overview Product code: 43749... - Page 36 Helix M1100 Q4 Mobile Product code: 43749...
-
Page 37: Main Menu Options
Helix M1100 Q4 Mobile Main Menu Options The main menu has the following options: 01) Press the UP/DOWN buttons to navigate through the main menu. 02) Press the SET button to open the submenus. DMX Settings In this menu you can set the DMX address, choose the desired DMX mode and activate/deactivate the wireless DMX. -
Page 38: Channels
Helix M1100 Q4 Mobile Channels In this menu you can set the desired DMX channel mode. 01) Press the UP/DOWN buttons to set the desired DMX channel mode. Choose one of the 3 options: ● 4 channels ● 6 channels ●... -
Page 39: Manual Mode
Helix M1100 Q4 Mobile Manual Mode In this menu you can manually set the desired color. Press the UP/DOWN buttons to select the parameter. Press the SET button to confirm the selection and open the submenu. Press the UP/DOWN buttons to increase/decrease the values: ●... -
Page 40: Built-In Programs Mode
Helix M1100 Q4 Mobile Built-in Programs Mode In this menu you can set the built-in auto programs. Press the UP/DOWN buttons to select one of the following options. The selection range is Program 01– Program 16: ● Program 01 You can select one of the static colors. See 6.8.4.1. Program 01 on page 39 for more information ●... -
Page 41: Slave Mode
Helix M1100 Q4 Mobile Slave Mode In this menu you can set the slave mode of the device. 01) Press the UP/DOWN buttons to select one of the following 2 options: 02) Press the SET button to confirm your choice. ●... -
Page 42: Curves Select
Helix M1100 Q4 Mobile Curves Select In this menu you can set dimming curves. 01) Press the UP/DOWN buttons to set the desired dimming curve. Choose one of the 4 options: ● Linear ● Square Law ● Inv Square Law ●... -
Page 43: Dmx Fail
Helix M1100 Q4 Mobile DMX Fail In this menu you can set the device’s behavior in case of a DMX failure. 01) Press the UP/DOWN buttons to set the desired DMX Fail option. Choose one of the 4 options: ● OFF: The device will black out the light output ●... -
Page 44: Dmx Sync
Helix M1100 Q4 Mobile DMX Sync In this menu you can set the devices’ Sync behavior, while using multiple Helixes. 01) Press the UP/DOWN buttons to set the desired DMX sync option. Choose one of the 2 options: ● ON: all Helix devices will simultaneously perform the same action, without any delays ●... -
Page 45: Calibration
Helix M1100 Q4 Mobile Calibration In this menu you can manually calibrate the desired color. 01) Press the UP/DOWN buttons to select the parameter. Press the SET button to confirm the selection and open the submenu. Press the UP/DOWN buttons to increase/decrease the values: ●... -
Page 46: Factory Reset
Helix M1100 Q4 Mobile Factory Reset In this menu you can restore the default factory settings of the device. 01) Press the UP/DOWN buttons to set the desired safety lock. Choose one of the 2 options: ● YES: Restore to Factory Default Settings ●... -
Page 47: Dmx Channels
Helix M1100 Q4 Mobile DMX Channels 4 channels 4 CH Function Value Setting 000–255 From low to high intensity (0–100 %) Green 000–255 From low to high intensity (0–100 %) Blue 000–255 From low to high intensity (0–100 %) White 000–255 From low to high intensity (0–100 %) 6 channels... - Page 48 Helix M1100 Q4 Mobile Function Value Setting 147–153 Color21(R075 G000 B255 W000) 154–160 Color22(R160 G000 B255 W000) 161–167 Color23(R255 G000 B255 W000) 168–174 Color24(R255 G000 B175 W000) 175–181 Color25(R255 G000 B100 W000) 182–188 Color26(R255 G000 B100 W050) 189–195 Color27(R255 G000 B025 W050) 196–202 Color28(R255 G000 B025 W025) 203–209...
-
Page 49: Rdm Information
This device supports RDM. Refer to 6.10.2. Supported RDM PIDs (Parameter IDs) on page 48 for more information. RDM Details ● Responder: 29B4:022xxxxx ● Manufacturer's ID: Showtec (Highlite International B.V.) ● Manufacturer Label: Showtec ● Model Description: Helix M1100 Q4 Mobile ●... -
Page 50: Troubleshooting
Helix M1100 Q4 Mobile Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 51: Maintenance
Helix M1100 Q4 Mobile Maintenance Safety Instructions for Maintenance DANGER Electric shock caused by dangerous voltage inside Disconnect power supply before servicing or cleaning. Preventive Maintenance Attention Before each use, examine the device visually for any defects. Make sure that: ●... -
Page 52: Draining Condensation Water
Helix M1100 Q4 Mobile Draining Condensation Water The Helix M1100 Q4 Mobile is IP65 rated. The device can resist water jets. If the device is exposed to extreme humid conditions during servicing, condensation may collect inside the device. This can happen also during transportation, if the device is exposed to extreme temperature variations. -
Page 53: Deinstallation, Transportation And Storage
Helix M1100 Q4 Mobile Deinstallation, Transportation and Storage Instructions for Deinstallation WARNING Incorrect deinstallation can cause serious injuries and damage of property. ● Let the device cool down before dismounting. ● Disconnect power supply before deinstallation. ● Always observe the national and site-specific regulations during deinstallation and derigging of the device. -
Page 54: Disposal
Helix M1100 Q4 Mobile Disposal This device contains a lithium-ion battery. Do not dispose of with the household waste. Correct disposal of this product Waste Electrical and Electronic Equipment This symbol on the product, its packaging or documents indicates that the product shall not be treated as household waste. - Page 55 Helix M1100 Q4 Mobile Product code: 43749...
- Page 56 ©2023 Showtec...