Lexmark CX930 User Manual page 146

Set up, install, and configure
18
Connect the finisher cable to the rear of the printer.
19
Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
20
Turn on the printer.
Add the finisher in the print driver to make it available for print jobs. For more information, see
options in the print driver" on page
To make the finisher available for print jobs, from the home screen, touch Settings > Device > Maintenance >
Configuration Menu > Finisher Configuration > Hole Punch Configuration > select a configuration.
76.
146
"Adding available