Lexmark CX930 User Manual page 209

Use printer menus
Menu item
Memory Use
All receive
Mostly receive
Equal*
Mostly send
All send
Cancel Faxes
Allow*
Don't Allow
Caller ID
Off
On
Alternate
Fax Number Masking
Off*
From Left
From Right
Digits to Mask
0–58 (0*)
Enable Line Connected
Detection
Off
On*
Enable Line In Wrong Jack
Detection
Off
On*
Enable Extension in Use
Support
Off
On*
Optimize Fax Compatibility
Fax Transport
T.38
Analog
G.711
etherFAX
Note: An asterisk (*) next to a value indicates the factory default setting.
HTTPS Fax Settings
Note: This menu appears only when Fax Transport is set to etherFAX.
Description
Set the amount of internal printer memory allocated for faxing.
Note: This menu item prevents memory buffer conditions and failed faxes.
Cancel outgoing and incoming faxes.
Enable a caller ID pattern.
Note: This setting appears only when the country or region selected in the
initial setup wizard supports multiple caller ID patterns.
Specify the format for masking an outgoing fax number.
Specify the number of digits to mask in an outgoing fax number.
Determine whether a telephone line is connected to the printer.
Note: Detection of events is instantaneous.
Determine whether a telephone line is connected to the correct port on the
printer.
Note: Detection of events is instantaneous.
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Note: Detection of events is instantaneous.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
Set the fax transport method.
Note: This menu item appears only when an etherFAX or Fax over IP (FoIP)
license bundle is installed in the printer.
209