Table of Contents
Advertisement
Use printer menus
Menu item
Contrast
Best for Content*
0
1
2
3
4
5
Background Removal
Level
‑4 to 4 (0*)
Mirror Image
Off*
On
Negative Image
Off*
On
Shadow Detail
‑4 to 4 (0*)
Scan Edge to Edge
On
Off*
Sharpness
1–5 (3*)
Temperature
‑4 to 4 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Automatic Redial
0–9 (5*)
Redial Frequency
1–200 minutes (3*)
Enable ECM
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the contrast of the output.
Adjust the amount of background visible on a scanned image.
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible on a scanned image.
Allow edge‑to‑edge scanning of the original document.
Adjust the sharpness of the scanned image.
Specify whether to generate a cooler or warmer output.
Description
Adjust the number of redial attempts based on the activity levels of recipient fax
machines.
Increase the time between redial attempts to increase the chance of sending
fax successfully.
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax transmission process caused
by telephone line noise and poor signal strength.
212
Advertisement
Table of Contents
