Table of Contents
Advertisement
Use printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply Address
(Off*)
Use SSL/TLS (Disabled*
Require Trusted Certificate (On*)
SMTP Server Authentication (No
authentication required*)
Device‑Initiated E‑mail (None*)
User‑Initiated E‑mail (None*)
Use Active Directory Device Credentials
(Off*)
Device Userid
Device Password
Kerberos 5 REALM
NTLM Domain
Disable "SMTP server not set up" error (Off*)
E‑mail Alerts Setup
Setup E-mail Lists and Alerts
E‑mail List 1
E‑mail List 2
E-mail Events
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Off
On* (5 seconds)
Error Prevention
Auto Reboot
Auto Reboot
Reboot when idle
Reboot always*
Reboot never
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the e‑mail settings of the printer.
Specify the e‑mail addresses and enable the e‑mail alert
events.
Note: This menu item appears only in the Embedded Web
Server.
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Let the printer continue processing or printing a job
automatically after clearing certain printer conditions that
require user intervention.
Set the printer to restart when an error occurs.
181
Advertisement
Table of Contents
