Adjusters "Time" And "Lux; A) "Time; B) "Lux; Erase Data - Conrad 750987 Operating Instructions Manual

10. Adjusters "TIME" and "LUX"

a) "TIME"

With this adjuster, you define after which time the lamp is turned off (if it was activated by the camera or the PIR
sensor)
A clockwise turn (towards "+") extends the activation time; a counter-clockwise turn to the left reduces
it.

b) "LUX"

The adjuster serves to set the brightness threshold at which the lamp is activated.
When turning clockwise (towards the moon icon), the lamp is first activated when it is really dark; when
turning counter-clockwise (towards the sun icon), the lamp is activated earlier.
11. Delete data

We recommend deleting an SD memory card on the PC (in a card reader).
Copy the files that the surveillance camera created on the SD memory card to a directory on the hard
disk and delete the entire SD memory card after successful copying before reinserting it into the
surveillance camera.
The internal memory of the surveillance camera and that of the SD memory card can be erased as follows (if an SD
memory card is inserted, the internal memory cannot be deleted):
• Press the buttons "SET" and "MODE" simultaneously and briefly to activate the test mode (the display shows
"TEST").
• Press the button "MODE" until the display shows the trashcan icon; at "ONE", the last recording is deleted; at "ALL"
the entire memory (you poss. have to press the "MODE" button again to switch from "ONE" to "ALL").
• Confirm the delete process with the button "SET"; after successful deletion, "DONE" briefly appears on the display.
• To quit the test mode now, once again press the buttons "SET" and "MODE" simultaneously and briefly
(alternatively, wait 5 minutes without pressing a button).
35