Special Functions; A) General Information; B) Select Photo Or Video Mode; C) Select Resolution - Conrad 750987 Operating Instructions Manual

9. Special functions

a) General Information

Keep the button "MODE" depressed until the camera icon blinks. By briefly pressing the button "MODE", you access
the respective special functions.
To quit the special functions menu, press the button "MODE" as long as "ESC" appears on the display. If you now
press "SET", the surveillance camera returns to normal operating mode (afterwards, it takes 60 seconds until the PIR
sensor is activated).

b) Select photo or video mode

• Press the button "MODE" until the camera icon appears on the display (with/without "2P") or the video icon.
Photo mode, one image per trigger through the PIR sensor
Photo mode, two images in sequence per trigger through the PIR sensor
Video mode, a 10-second video clip per trigger through the PIR sensor
• Confirm the desired function with the button "SET"; the display shows "DONE".
• Briefly press the button "MODE" to access the next setting (to leave the special functions menus, press the button
as long as "ESC" is displayed, then confirm this with the button "SET", see above).
c) Selecting the definition
Two definition stages are available. With a low resolution, you can save more images or videos, but the image quality
suffers.
• Press the button "MODE" until the display either shows the icon with the three stars (high resolution, 2 megapixels)
or the icon with one star (lower resolution, 1.3 megapixels).
• Confirm the respective selection with the button "SET"; the display shows "DONE".
• Briefly press the button "MODE" to access the next setting (to leave the special functions menus, press the button
as long as "ESC" is displayed, then confirm this with the button "SET", see above).
33