D) Setting Recording Interval; E) Select Lamp Mode; F) Quit Special Function Menu - Conrad 750987 Operating Instructions Manual

d) Setting the recording interval
The surveillance camera waits for this interval until the PIR sensor triggers again and recording starts. This prevents
the memory from being used up too fast.
• Activate the special functions menu by keeping the button "MODE" depressed until the camera icon blinks.
• Press the button "MODE" until the last line of the display shows "to-xx", whereby for "xx" a number appears on the
display; this represents the recording interval in minutes.
• With the button "SET", you can select the time from 1 to 60 minutes (keep button depressed longer for quick
adjustment). The set time is applied automatically when changing to the next menu point.
• Briefly press the button "MODE" to access the next setting (to leave the special functions menus, press the button
as long as "ESC" is displayed, then confirm this with the button "SET", see above).
e) Selecting the lamp mode
• Press the button "MODE" until "AUTO" or "OFF" blinks on the display.
In "AUTO" mode, the lamp is activated if the camera does not have enough light for recording.
In "OFF" mode, the lamp is activated if the brightness value (adjustable via "LUX") falls below a certain level. In
this operating mode, the icon "* AUTO" does not appear on the display.
• Confirm the respective selection with the button "SET"; the display shows "DONE".
• Briefly press the button "MODE" to access the next setting (to leave the special functions menus, press the button
as long as "ESC" is displayed, then confirm this with the button "SET", see above).

f) Quit special function menu

• Briefly press the button "MODE" until "ESC" blinks.
• Briefly press the button "SET" to return the camera to normal operating mode.
34