Logic Control Outputs; Table 113: Pt2002-A1 Logic Control Outputs Connector - 'Cn3 - Siemens Cerberus PACE Manual

7.4.8 Logic control outputs

A6V10430579_en--_b
The PT2002-A1 provides 4 logic control outputs. They are open collector
transistors switching to GND.
The 4 logic outputs can be used to switch lamps, relays or other components with
a current draw of max. 200mA.
The output can be powered with the DC 10 V provided on pin 12 of the connector,
or with a voltage of max. DC 36 V.
The logic control outputs 1 and 2 are occupied by the PT2002-A1.
Logic control outputs connector - 'CN3'
Pin Description
1 Analog input 1
2 Analog input 2
3 Analog input 3
4 Analog input 4
5 Analog input 1
6 Analog input 2
7 Logic output 1
8 Logic output 2
9 Logic output 3
10 Logic output 4
11 GND
12 DC 10 V

Table 113: PT2002-A1 logic control outputs connector - 'CN3'

For more information, see Use logic control output [➙ 70].
Connect external components
Fire brigade call station (AT) PT2002-A1
Remark
The analog control input cannot be used as
the logic output.
The analog control input cannot be used as
the logic output.
The analog control input cannot be used as
the logic output.
The analog control input cannot be used as
the logic output.
The analog control input cannot be used as
the logic output.
The analog control input cannot be used as
the logic output.
Occupied by the PT2002-A1
Occupied by the PT2002-A1
-
-
GND reference voltage
10 V reference voltage
7
143 | 173