How To Create A Control Logic - Siemens FXS901 User Manual

5.15 HOW TO CREATE A CONTROL LOGIC

FXS901 software provides 7 kinds of control logic:
·
Basic control
·
Advanced control
·
User control
·
LED control
·
Releasing control
·
Mimic control
·
Test control
The table below shows the differences:
Control
Basic control
Advanced control
User control
LED control
Releasing control (RelCtl1
and 2)
Mimic control
Test control
The steps below describes the case when the devices under "Automatic Alarm Zone 2" and "Automatic Alarm
Zone 3" release an alarm at the same time, the output or "Effect" of (Intelligent Control @2) is activated.
1. Right click "New FACP1" under the Control tree and then click "Insert Node". Select the wanted control
logic (take Basic control as an example). The new control logic "Control 2" is added and displayed under
"New FACP1" and on the Children view.
2. Select "Cause (OR)" under Control 2, right click on it, then click "Insert Node". "Cause Fire Calculation"
and "Cause Fire Status Tracer" are listed. "Cause Fire Calculation" is used to define "OR/AND/SUM" logic.
A6V10336897_d_en_
FXS901 User Manual
Cause
OR / AND / SUM
OR
OR / User level
-
OR / AND
OR
OR
Effect
All effects get active at the same time when cause
conditions are fulfilled.
Effect gets active based on "NotificationEventType"
setting when cause conditions are fulfilled.
Effect gets active based on "Command list" setting
when user level activates.
Effect gets active when cause conditions are
fulfilled.
When "Immediately" is selected, effects get active
at the same time when cause conditions are
fulfilled. When "ReleaseSync" is selected, the
system operates simultaneously with the releasing
channel.
The LED status changes with the status of the
cause.
When cause conditions are fulfilled, the selected
channels under Effect are activated. A maximum of
4 input channels are supported for test control and
the 4 channels are selected in Property by default.
The 4 channels (Active Channel 1, 2, 3 and 4)
correspond respectively to the devices listed under
Hardware tree in order from top to bottom.
25/49