Analog Control Inputs; Table 101: Pt2001-A1 Analog Control Inputs Connector - 'Cn1 - Siemens Cerberus PACE Manual

7
Connect external components
Desk call station PT2001-A1

7.1.9 Analog control inputs

130 | 173
The PT2001-A1 provides 6 analog control inputs. These analog control inputs
measure the voltage between the GND and the DC 10 V.
The values can be used as a local gain control or as control values for the audio
output volume.
Analog control inputs connector - 'CN1'
Pin Description
1 Analog input 1
2 Analog input 1
3 Analog input 3
4 Analog input 4
5 Analog input 1
6 Analog input 1
7 Logic output 1
8 Logic output 2
9 Logic output 3
10 Logic output 4
11 GND
12 DC 10 V

Table 101: PT2001-A1 analog control inputs connector - 'CN1'

For more information, see Use analog control inputs [➙ 68].
Remark
-
-
-
-
-
-
Not to be used as the analog inputs
Not to be used as the analog inputs
Not to be used as the analog inputs
Not to be used as the analog inputs
GND reference voltage
10 V reference voltage
A6V10430579_en--_b