6.9.4 Connect 100 V analog audio output
A6V10430579_en--_b
WARNING
Voltages of up to AC 100 V at the 100 V analog audio output terminals
Contact with live parts can lead to electric shock and may be fatal!
●
Disconnect AC 230 V mains voltage before performing any installation or
maintenance work.
●
Disconnect DC 24 V power supply voltage before performing any installation
or maintenance work.
●
Ensure that the power supply cannot be re-energized inadvertently.
The 'Power amplifier (1x250W)' PV2007-A1 provides one connector ('Out A') to
connect the 100 V analog audio outputs.
1
Out A
Fig. 65: PV2007-A1 100 V analog audio output connector
100 V analog audio output connector - 'Out A'
Pin
Description
1
0 V
2
50 V
3
100 V
Table 45: PV2007-A1 100 V analog audio output connector - 'Out A'
The output is connected to the 100 V analog audio inputs of the digital audio matrix
PC200x-A1. The digital audio matrices supervise the amplifier and the speaker
lines.
The output voltage can be selected between 100 V and 50 V.
Install internal components
Power amplifier (1x250W) PV2007-A1
Remark
0 V reference
50 V output
100 V output
6
87 | 173