Table of Contents
Advertisement
Set date and time
1. Using the "MENU" key, select the main menu of the AOP 30.
2. Using "F2", select the menu item "Commissioning/service". Confirm with "F5"
3. Using "F2", select the menu item "AOP30 settings". Confirm with "F5"
4. Using "F2", select the menu item "Set date/time". Confirm with "F5". Using "F2", select the
appropriate input location for date or time. Enter the actual value using the numerical keys.
5. Use "F5" to save the settings.
9.5
Cleaning
The following description describes cleaning based on a SINAMICS GL150. Carefully read and
understand the notes provided in the operating instructions of the upgraded converter.
9.5.1
Removing dust deposits
Remove dust deposits at least once per year. You can use an ESD brush or an ESD vacuum
cleaner. The ventilation openings in the cabinet must never be obstructed.
NOTICE
Damage due to moisture
Fiber-optic cables, fiber-optic cable bundles and electronic components can be damaged if
cleaned using a damp rag.
• If the components are very dusty, remove the dust using a dry, lint-free cloth. In so doing,
NOTICE
Damage caused by aggressive cleaning agents
Aggressive chemical agents can damage the electronics. This can result in malfunction.
Never use any type of chemical agent or liquid.
• Only remove severe dirt and contamination after prior consultation with service experts for
Use a dry, clean, lint-free ESD cleaning cloth. Wipe all external parts of the rack with it. Make sure
that the dirt is not distributed, but actually removed by constant changes of the wiping surface
of the cloth. For significant levels of pollution and dirt, use an ESD cloth soaked in ethyl alcohol
(however, not so much that it drips from the cloth).
3rd Party LCI Control Upgrade
Operating Instructions, 02/2022, A5E31872818
do not bend the fiber-optic cables.
the particular product.
Maintenance
9.5 Cleaning
119
Advertisement
Table of Contents
