Flashforge AD1 User Manual page 28

Flashforge Cloud connection
1. Turn on/off [Flashforge Cloud]
2. Find the registration code of the machine on the [Settings]-[About] page.
3. Open the Flashforge Cloud (cloud.sz3dp.com), click [Add Printer], enter the
printer registration code in the pop-up window, and associate the equipment with
the cloud platform. For details on how to connect the Flashforge Cloud, see the next
chapter about printing.
Status
Click the Status button to view the temperature of current nozzle and the current
coordinate value of the nozzle.
About
Display the basic information of the equipment. The details of the information are
subject to the actual display.
You can view the firmware version; the print size; the cumulative print duration.
Ethernet IP address: When connecting to the Internet cable, the Ethernet IP address
and Ethernet MAC address will be displayed here.
Note: When applying for after-sales service, please present the serial number in
[About] to the after-sales engineer.
Note: The firmware is updated regularly, and the interfaces may differ.
27