Flashforge AD1 User Manual page 20

1.4 设备设置操作
1.4.5 Glass Plane Installation
Special Note:
1. Since glass plate is easy to break and Flashforge does not sell glass plate, you
can purchase 620*620*5mm glass for printing in local market. When making
super word, some users may need glass curing. Flashforge recommends 5mm
non-tempered glass;
2.Be sure to calibrate the extruder before installing the glass plate to prevent the
nozzle from bumping against the glass.
Calibration method:
According to the glass thickness H, set the Z-axis coordinate to H+1MM; for example,
the glass is 5mm thick, set the Z-axis coordinate value to 6mm.
1.Click Tools - Settings - extruder Calibration
2.When the Z-axis value is set to 6, click "OK" and the Z-axis motor is locked. No other
operations are required. Click Finish directly.
19