Flashforge AD1 User Manual page 10

Printing platform
Platform sticker
Printing volume
Leveling nut
Extruder
Nozzle
Cooling fan
Filament hole
Mounting bracket
Filament guide
tube
Nozzle cleaner
1.1.2 Description of Terms
The part used to build a solid model.
The Flashforge print sticker can be attached to the printing
platform to better attach the printing model to the platform. When
the platform sticker starts to affect the printing effect, please
replace it in time, i.e. the attached textured paper.
The printing volume refers to the length *width* height of the build
model. The maximum printing volume of AD1 Ad word 3D printer is
600*600*70mm. You can't directly build models that exceed this
parameter.
The 8 leveling nuts under the platform bracket are used to adjust
the spacing between the printing platform and the nozzle.
Feeding the filament heated and then extruded from the nozzle.
The lowermost brass-colored metal structure constituting the
extruder; the supplies heated by the extruder are extruded here.
The cooling fan is used to reduce the temperature of the extruder
and accelerate the solidification of the supplies.
The hole for the supplies to enter the extruder; located at the top of
the extruder.
The device for placing supplies; located on the back of the printer.
The supplies are fed into the white Teflon tubefrom the filament
box.
Used to clear the residual supplies in the nozzle.
09