Mounting The Device; Required Tool; Installation - Endress+Hauser Liquiphant FTL64 Operating Instructions Manual

Mounting
16
 10 Examples of support in the event of dynamic load
Marine approval: In the case of pipe extensions or sensors longer than 1 600 mm, a
support is needed at least every 1 600 mm.
5.2

Mounting the device

5.2.1

Required tool

• Open-ended wrench for sensor installation
• Allen key for housing locking screw
5.2.2

Installation

Aligning the tuning fork using the marking
The tuning fork can be aligned using the marking. Medium can thus run off easily and
buildup is avoided.
Markings may include the following:
• Material information, thread name or circle on the hexagonal nut
• II symbol on the back of the flange
 11 Markings to align the tuning fork
Liquiphant FTL64 HART
A0042356
A0042348
Endress+Hauser