Installation
10
Examples of support in the event of dynamic load
4.2
Mounting the measuring device
4.2.1
Required tool
• Open-ended wrench for sensor installation
• Screwdriver for electrical connection
4.2.2
Installation
Align the tuning fork with the marking
Use the marking to align the tuning fork in such a way that medium can run off easily and
deposit buildup is avoided.
Markings may include the following:
• Material specification, thread description or circle on the hexagonal nut or on the weld-in
adapter
• II symbol on the back of the flange
14
Liquiphant FTL64
A0042356
Endress+Hauser