Mounting The Device - Endress+Hauser Liquiphant FTL51B Brief Operating Instructions

Liquiphant FTL51B HART
5.2

Mounting the device

5.2.1 Required tool
• Open-ended wrench for sensor installation
• Allen key for housing locking screw
5.2.2 Aligning the tuning fork using the marking
 10 Position of the tuning fork when installed horizontally in the vessel using the marking
5.2.3 Installing the device in piping
• Flow velocity up to 5 m/s with a viscosity of 1 mPa⋅s and density of 1 g/cm³ (62.4 lb/ft³)
(SGU).
Check for correct functioning in the event of other process medium conditions.
• The flow will not be significantly impeded if the tuning fork is correctly aligned and the
marking is pointing in the direction of flow.
• The marking is visible when installed
 11 Installation in pipes (take fork position and marking into consideration)
Endress+Hauser
Mounting
A0039125
A0034851
13