Filtering The Event Logbook; Overview Of Information Events - Endress+Hauser Liquiphant FTL64 Operating Instructions Manual

Diagnostics and troubleshooting
46
In addition to the operating time when the event occurred, each event is also assigned a
symbol that indicates whether the event has occurred or is finished:
• Diagnostic event
• : Occurrence of the event
• : End of the event
• Information event
: Occurrence of the event
11.7.2

Filtering the event logbook

Filters can be used to determine which category of event messages is displayed in the
Event list submenu.
Navigation: Diagnostics → Event logbook
Filter categories
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information
11.7.3

Overview of information events

Info number
I1000 --------(Device ok)
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I11074 Device verification active
I1110 Write protection switch changed
I11104 Loop diagnostics
I11284 DIP MIN setting to HW active
I11285 DIP SW setting active
I1151 History reset
I1154 Reset terminal voltage min/max
I1155 Reset electronics temperature
I1157 Memory error event list
I1256 Display: access status changed
I1264 Safety sequence aborted
I1335 Firmware changed
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1440 Main electronic module changed
I1444 Device verification passed
I1445 Device verification failed
I1461 Sensor verification failed
I1512 Download started
Liquiphant FTL64 HART
Info name
Endress+Hauser