Controlling Connected Computers Or Other Programs And Telephone Data Service (For Hipath 3500/3550/3700/3750 Only) - Siemens HiPath 5000 RSM Operating Instructions Manual

Using Other Functions
Step by Step
(
38 38 38 38
Controlling Connected Computers or
Other Programs and
Telephone Data Service (For HiPath 3500/
3550/3700/3750 only)
If this function has been configured (contact the service
personnel), you can control connected computers or
programs running on them, such as hotel services or
information systems, from your telephone.
Precondition: You have set up a connection.
) Enter the code.
The connected computer now prompts you to enter the
data, which you can do in one of two ways. Contact the
service personnel to find out which option is
programmed in your system:
• Input in en-bloc mode
... Enter data.
Press this key at the end of the entry.
or • Input in online mode:
The connected computer processes your entries
directly.
Enter the code.
... Enter data.