Setting The System Setup - Sherwood Newcastle R-871 Operating Instructions Manual

SETTING THE SYSTEM SETUP

When selecting the items other than OSD POSITION ADJUST
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
1
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
2
When selecting the AMP ASSIGN
• You should assign the power amplifier for the surround back/room 2 channels to ROOM 2 when the
SURROUND BACK/ROOM 2 speaker terminals are connected to the speakers installed in another room
for ROOM 2 playback. In this case, you need not use the power amplifier to drive the speakers
additionally. (For details on ROOM 2 connection, refer to "CONNECTING ROOM 2 OUTS" on page 12.)
SURR BACK : To use power amplifier for the surround back channels. ("
ROOM 2 : To use it for ROOM 2 playback. ("
• AMP ASSIGN : To assign the surround back channel's power
amplifier to ROOM 2 for ROOM 2 playbak.
• SUBWOOFER MODE : To select the desired subwoofer mode.
• TONE CONTROL : To adjust the tone (bass and treble) as
desired.
• CINEMA EQ : To select the desired cinema EQ mode.
• BACKGROUND : To select the desired background color of the
OSD menu.
• MOMENTARY OSD : To turn on or off the OSD that shows the
status corresponding to each operation
momentarily.
• OSD POSITION ADJUST : To adjust the positon of the
" lights up.)
49
momentary OSD and the OSD menu.
" goes off.)