Sherwood R-807 Operating Instructions Manual
Network av receiver
Hide thumbs
Also See for R-807:
- Operating instructions manual (56 pages) ,
- Operating instructions manual (172 pages) ,
- Operating instructions manual (57 pages)
Chapters
Table of Contents
Related Manuals for Sherwood R-807
Summary of Contents for Sherwood R-807
- Page 1 R-807 Network AV receiVer récepteur réseAu AV receptor A/V coN coNexióN de red Netzwerk-AV-receiVer Сетевой AV-реСивер operAtiNG iNstructioNs Guide d’utiLisAtioN iNstruccioNes de FuNcioNAMieNto BedieNuNGsANLeituNG иНСтрУКЦиЯ По ЭКСПЛУАтАЦии...
-
Page 2: Safety Information
Safety Information READ THIS BEFORE OPERATING YOUR UNIT CAUTION CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RISK OF ELECTRIC SHOCK REMOVE FRONT OR BACK COVER. NO USER-SERVICEABLE DO NOT OPEN PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. -
Page 3: Table Of Contents
33 Configuring the Windows Media Player 11 Connecting Speakers 34 Listening to Music from the Media Server 11 Placing Speakers 34 Using the Sherwood Remote Application 13 Connecting Speakers 34 Preparing for the Application 14 Setting the Speaker 35 Using the Application... - Page 4 R-807 NETWORk AV RECEIVER 42 CUSTOmIzING SETTINGS 51 TROUBlESHOOTING 51 GENERAL 42 Setting the System 51 SOUND 43 Setting Options Overview 52 VIDEO 44 Setting the System Setup 53 USB device 44 AMP Assign 54 NETWORK CONNECTION 44 Automatic Power Control...
-
Page 5: Getting Started
Getting Started What's Included main unit Remote control (1 ea) Battery Power Cable (1 ea) Setup mic (1 ea) R807 NETWORK AV RECE VER OP RA ING NS RUC IONS Fm antenna (1 ea) Am Antenna (1 ea) User manual... -
Page 6: Installing The Remote Control Battery
R-807 NETWORk AV RECEIVER Installing the Remote Control Operating the range of the Battery Remote Control Remove the battery cover. Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote control sensor. -
Page 7: Parts Description
Parts Description Front Panel 10 11 12 Main Power Switch Input Selector Standby Indicator Headphone Connector On/Standby Switch Aux Input Connector IR Sensor Setup MIC Connector Band Select Button Tuning Up/Down Buttons Display Preset Select Buttons Surround Select Buttons Stereo Mode Button Master Volume Control USB Port... -
Page 8: Front Display
R-807 NETWORk AV RECEIVER Front Display 9 10 11 Information Display WMA Indicator Dolby Digital Surround indicator Sleep Timer Indicator Auto Detecting Indicator Preset Indicator RDS Indicators Station Memory Indicator Stereo Indicator Preset Station Indicator Tuning indicator Direct Indicator Room2 Indicator... -
Page 9: Remote Control
Parts Description Remote Control Power On Button Room2 Input Select Button Source Select Buttons Surround Select Buttons Top Menu Button ▲/▼/◄/► Select Buttons ENTER/MEMO Enter/Memory Button SEARCH.m RDS Search Button Display/Mode Button Stop Button Repeat Button Tuning Up/Down Buttons Rewind/Fast forward Buttons Preset Station Up/Down Buttons Previous/Next Buttons Random Button... -
Page 10: Making Connections
Making Connections Connection Overview Connect various external devices to the ports on the main unit. Find an external device you want to connect to the main unit as shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details. -
Page 11: Connecting Speakers
making Connections Connecting Speakers Placing Speakers Determine the locations for your speaker placement according to their manufacturer’s directions and the layout of your listening room. Use the illustration on page 12 as a guide for speaker placement. To create the most realistic surround-sound environment possible, you should place your speakers in a circle around the listener. - Page 12 R-807 NETWORk AV RECEIVER • In some rooms, the best performance comes from Surround back left and right speakers placing the subwoofer behind the listener. A good • Place the surround back speakers at the back facing way to determine the best location for the subwoofer forward together and closer than front speakers.
-
Page 13: Connecting Speakers
making Connections Connecting Speakers Carefully check the left (L) and right (R) channels and the polarities on the speakers being connected to this receiver. Connecting Speaker Wires Strip away approx. 10 mm (3/8 inch) of wire Insert the bare part of the wire. insulation, and then tightly twist the wire ends. -
Page 14: Setting The Speaker
R-807 NETWORk AV RECEIVER • Be sure to connect speakers firmly and accurately Press the remote control’s SETUP button. The according to the channel (left and right) and the main unit’s OSD System Setup menu will appear polarity (+ and −). If the connections are incorrect, no on the TV. -
Page 15: Connecting A Tv
making Connections Connecting a TV You can skip the “Crossover” setting. Select “Speaker Distance”. The Speaker Connecting with an HDmI TV Distance menu will appear. Measure the distance from each speaker in your With HDMI, you can easily enjoy high quality sounds system to the listener. -
Page 16: Connecting With A Non-Hdmi Tv
R-807 NETWORk AV RECEIVER HDMI has the capability to support standard, Connecting with a non-HDmI TV enhanced, or high-definition video plus standard to If your TV does not have an HDMI connector, or if multi-channel surround-sound audio. HDMI features your TV does have an HDMI connector but you are... -
Page 17: Connecting Playback Components
making Connections Connecting Playback Connecting Video Components Components You will need to make composite video connections from your source devices that do not have HDMI video connections. You will also need to make an audio Source devices are components from which a playback connection from the device to the main unit. -
Page 18: Connecting Audio Components
R-807 NETWORk AV RECEIVER Connecting Audio Components Coaxial Digital Audio Connection If your source devices have a coaxial digital output, Optical Digital Audio Connection connect it to the main unit's coaxial digital audio You can connect components equipped with an optical connector. - Page 19 making Connections Analogue Audio Connection F.AUX Connection Make analog audio connections from your source You can use the F.AUX input jack to connect portable devices that do not have HDMI or digital audio audio components such as an MP3 player, etc. connections.
-
Page 20: Connecting Recording Components
R-807 NETWORk AV RECEIVER Connecting to a Network Connecting Recording Components You can connect video and audio recording devices to the VIDEO OUT and AUDIO OUT jacks. You can make If you have an internet connection, you can connect the... -
Page 21: Connecting An Antenna
making Connections Connecting an Antenna To listen to radio stations, connect the FM wire antenna Outdoor Antenna and AM loop antenna as illustrated below. Remove the indoor antenna if it is connected. Connecting Fm Antenna Connect the FM outdoor antenna to the FM antenna terminal. -
Page 22: Connecting Am Antenna
R-807 NETWORk AV RECEIVER Connecting Am Antenna Assemble the AM loop antenna as illustrated below. Rear Panel Place the antenna as far as possible from the main unit, TV set, speaker cords and the AC input cord, and set the direction for the best reception. -
Page 23: Connecting To Muti-Room
making Connections Connecting to Muti-Room The multi-zone function allows you to play back different input sources in the room where the unit is installed (Main Room) and in another room (Room2). main Room You can enjoy sounds from the equipment connected Sub Room (Room2) to the main unit in a room other than the main room. -
Page 24: Connecting To The System's Internal Amplifier
R-807 NETWORk AV RECEIVER Connecting to an External Amplifier Connecting to the System's Internal Amplifier Connect the external amplifier (with volume control) Connect the speakers placed in Room2 to the main unit placed in Room2 to the main unit with analogue audio with speaker cables. -
Page 25: Controlling Room2
making Connections Controlling Room2 Adjust the tone (bass and treble) for ROOM 2 source. Connect the external amplifier (with volume control) • The tone level can be adjusted within the placed in Room2 to the unit with analogue audio cable. range of -10 ~ +10 dB. -
Page 26: Operating Your System
Operating Your System Listening to Your System Start playback of the component you selected in Basic Operation step 1. You can listen to audio by following the basic During playback, you can adjust the volume procedures below. level. Turn on the connected component. •... -
Page 27: Enjoying Surround Effects
Operating Your System Enjoying Surround Effects This main unit incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. Setting the Surround mode Before surround playback, first perform the speaker setup procedure, etc. on the OSD settings for optimum performance. - Page 28 R-807 NETWORk AV RECEIVER DTS Digital Surround Dolby Digital DTS Digital Surround (also called simply DTS) supports Dolby Digital is the multi-channel digital signal format up to 5.1 discrete channels and uses less compression developed by Dolby Laboratories. Discs bearing for high fidelity reproduction.
- Page 29 Operating Your System Theater Stadium This mode provides an expansive sound field in order This mode provides the effect of being in a theater when watching a play. to achieve a true stadium effect when watching baseball or soccer games. movie multi Channel Stereo This mode provides the effect of being in a movie...
-
Page 30: Cancelling The Surround Mode For Stereo Operation
R-807 NETWORk AV RECEIVER Cancelling the Surround mode for Stereo Adjusting the Current Channel level Operation After adjusting each channel level with test tone, adjust the channel levels according to the program sources or Press STEREO. to suit your tastes. -
Page 31: Listening To Music On Usb
Operating Your System Listening to Music on USB You can play audio files from a USB device. However, editing or copying a data file is not possible. To Pause Playback During playback, press • Playback will stop at the point where the button is pressed. -
Page 32: To Play Repeatedly
R-807 NETWORk AV RECEIVER Listening to Internet Radio To Play Repeatedly During playback, press REPEAT. You can listen to Internet radio broadcasts provided by Each time the button is pressed, repeat mode vTuner. You can control the internet radio with the menu changes as follows: displayed on the TV screen. -
Page 33: Listening To Music From The Media Server
Operating Your System Listening to Music from the Select the desired category by pressing and , then press ENTER on the remote Media Server control. You can play music files stored on a computer (media server) connected to this receiver via a wired or wireless network. -
Page 34: Listening To Music From The Media Server
R-807 NETWORk AV RECEIVER Repeat step 3 above until the desired music file listening to music from the media Server is selected. Start your computer. The playback functions are the same as those for USB. Refer to ** for details on playback. -
Page 35: Using The Application
• When you connect your phone with the main unit using a Wi-Fi hotspot, you should enter the password (1234567890) for the system connection. Go to Wi-Fi settings to select and tap R-807 and Connect. Note Note • When Ethernet is not connected to the main unit,... - Page 36 R-807 NETWORk AV RECEIVER Overview of the main Screen Using Direct AV On Direct AV, you can listen to songs, watch videos, and view photos stored on your Android phone or iPhone. Tap Wiink at the bottom of the phone screen.
- Page 37 Operating Your System • Android Watching Videos on Your Smartphone You can select a video on the video file list and enjoy it on the main unit. listening to Songs on Your Smartphone You can select a song on the song list and play it over Description the main unit.
- Page 38 R-807 NETWORk AV RECEIVER Viewing Photos on Your Smartphone Using Internet Radio and media Server You can view photos as a slideshow and set the You can use your smartphone as a remote controller for slideshow transition time at 10, 20, or 30 seconds.
-
Page 39: Listening To Fm Radio
Operating Your System Listening to FM Radio manual Presetting Tune to the desired station with auto or manual Auto Tuning tuning. Press ENTER/MEMO. Press TUNE + or TUNE - for more than • A preset number blinks. 2 seconds. • The tuner keeps searching until a station with strong signal strength is found. -
Page 40: Auto Presetting
R-807 NETWORk AV RECEIVER Auto Presetting RDS Tuning Press and hold down ENTER/MEMO for more RDS (Radio Data System) is a way of sending information signals along with transmitter signals. than 2 seconds. Your tuner is capable of translating these signals and •... -
Page 41: Recording
Operating Your System Recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV). Keep in mind you can’t make a digital recording from an analog source or vice-versa, so make sure the components you are recording to/from are hooked up in the same way. -
Page 42: Customizing Settings
Customizing Settings Setting the System You can program additional sound settings. Press ENTER/MEMO to confirm the selected Press SETUP. setting. Press or to select a main menu. Press or to set a value. Press ENTER/MEMO to confirm. Press ENTER/MEMO to confirm. -
Page 43: Setting Options Overview
Customizing Settings Setting Options Overview main menu Sub menu Go to Page Description Assigns the power amplifier. 1. SYS SET A.P.C. Automatic Power Control. Sets the standby time for the network. N.S.C. Automatically optimizes the speaker settings. A. SETUP Sets the speaker system. SPK SET 2. -
Page 44: Setting The System Setup
R-807 NETWORk AV RECEIVER Setting the System Setup Setting the Speaker Setup AmP Assign After you have installed this receiver and connected all the components, you should adjust the speaker The surround back channels’ power amplifier can drive settings for the optimum sound acoustics according to surround back speakers, front height speakers, and your environment and speaker layout. - Page 45 Customizing Settings Caution • Since the microphone for Auto Setup is designed exclusively for this receiver, do not use a microphone other than the one supplied with this receiver. Place the microphone on a flat level surface at the listening position. •...
-
Page 46: Speaker Setup
R-807 NETWORk AV RECEIVER Speaker Setup Speaker Distance There are several ways you can use the speaker • Select the desired unit (Meter or Feet) before setting channels with the main unit. In addition to a normal the speaker distance. Once a unit is selected, the... -
Page 47: Setting The Hdmi Setup
Customizing Settings Setting the HDMI Setup Setting the Surround Parameter Setup HDmI You can specifies the routing of the HDMI audio signal Height Gain from the system or through to a TV or flat screen TV. You can adjust the front height channel level as desired The HDMI connection can carry uncompressed digital (This setting is valid only when listening in Dolby Pro video signals and digital audio signals. -
Page 48: Drc
R-807 NETWORk AV RECEIVER Adjust the selected tone as desired by pressing or . This function compresses the dynamic range of • The tone level can be adjusted within the previously specified parts of the Dolby Digital, Dolby range of -10 ~ +10 dB. -
Page 49: Setting The Multi Room Setup
Customizing Settings Setting the Multi Room Setup Network Settings Overview main menu Sub menu Go to Page In addition to your main room, you can also enjoy playback in Room2. Soft AP Direct hotspot AV Set menu item Description Wi-Fi direct NETWORk Turns on the Room2 function. -
Page 50: Setting The Wired Network Connection
R-807 NETWORk AV RECEIVER Setting the Wired Network Connection Setting Other Network Options Before you setup the connection, check that the LAN menu item Description cable is connected to the LAN/ETHERNET connector Views and changes the name of properly and securely. For details, see “Connecting to AP Name the unit displayed on the network. -
Page 51: Troubleshooting
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting servicing. Should any problem persist, consult your nearest authorized dealer or authorized independent company. If the unit does not operate normally due to external influence such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions. -
Page 52: Video
R-807 NETWORk AV RECEIVER Problem Remedy Check the output audio formats support system. • • Check that the speakers and equipment are connected securely. Sound is interrupted or there • Move your audio equipment away from the TV. is noise. -
Page 53: Usb Device
Troubleshooting Symptom Remedy • Depending on the output settings of the source component, the video format may not be displayed. Change the output settings of the source, or connect your source component directly to TV using the component or composite video jacks. •... -
Page 54: Network Connection
R-807 NETWORk AV RECEIVER NETWORk CONNECTION Symptom Remedy • You cannot connect to a network using WPS when your access point is set to The main unit cannot WEP. Set up your network after searching the access point using the access connect to the WPS via a wireless LAN connection. -
Page 55: Additional Information
Additional Information Specifications Audio Section 75 W per channel, two channels driven @ 6 ohms, 20 Hz – 20 kHz, <0.1 % THD; 100 W per channel, Multichannel power two channels driven @ 6 ohms, 1 kHz, <1 % THD 200 mV/47k ohms Input sensitivity/impedance Signal-to-noise ratio (IHF-A) -
Page 56: Trademarks And Licenses
R-807 NETWORk AV RECEIVER Video Section Television format NTSC/PAL Input level/impedance 1 Vp-p/75 ohms Output level/impedance 1 Vp-p/75 ohms Video frequency response (composite video) 10 Hz – 8 MHz (–3 dB) HDMI With 3 D and Deep Color General Specifications Power requirement... - Page 57 R-807 Network AV receiVer récepteur réseAu AV receptor A/V coN coNexióN de red Netzwerk-AV-receiVer Сетевой AV-реСивер printed in china imprimé en chine impreso en china Gedruckt in china 5707-00000-795-0s отпечатано в Китае...