System Connections - Sherwood Newcastle R-871 Operating Instructions Manual

System Connections

• Please be certain that this unit is unplugged from the AC outlet before making any connections.
• Since different components often have different terminal names, carefully read the operating instructions of the
component connected.
• Be sure to observe the color coding when connecting audio, video and speaker cords.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
1. CONNECTING ANTENNAS
• Change the position of the FM indoor antenna
until you get the best reception of your favorite
FM stations.
• Place the AM loop antenna as far as possible
from the receiver, TV set, speaker cords and
the AC input cord and set it to a direction for the
best reception.
• If the reception is poor with the AM loop anten-
na, an AM outdoor antenna can be used in
place of the AM loop antenna.
GND
AM
LOOP
5
GND
AM
LOOP
• A 75 Ω outdoor FM antenna may be used to fur-
ther improve the reception. Disconnect the
indoor antenna before replacing it with the out-
door one.
GND
AM
LOOP