Sherwood Newcastle R-871 Operating Instructions Manual page 42

Channel search
• In the XM mode, press the TUNING UP (+)/DOWN (-) buttons repeatedly to select the desired channel.
Direct search
• Direct search is useful when you already know
the channel number.
In the XM mode, select the direct
1
search mode.
• Each time this button is pressed, the search mode
changes as follows:
→ →
DIRECT SEARCH CATegory search
Note:
• When using channel search or preset search, press
this button to select the search off.
Category search
• Category search allows you to select the desired
channel by the selected category.
In the XM mode, select the category
1
search mode.
• "CAT : ~ " is displayed.
• The channel changes continuously when you
press and hold the TUNING button.
2
Examples :
For "3"
For "27" :
For "124" :
• When "DIRECT SEARCH" disappears, repeat
again from the above step ①.
→
OFF
2
• Each time these buttons are pressed, one of
different categories is selected.
• When "CAT : ~ " disappears, repeat again from
the above step ①.
41
While displaying "DIRECT SEARCH",
select the desired channel number with
pressing the NUMERIC (0 ~ 9) buttons.
:
While displaying "CAT : ~ ", select the
desired category, then press the
ENTER button.