Setting The System Setup; Amp Assign; Automatic Power Control; Auto Setup - Sherwood R-807 Operating Instructions Manual

R-807 NETWORK AV RECEIVER

Setting the System Setup

AMP Assign

page 14 and "Connecting Multi-Room" on page 24.
Menu item
Surround Back when connecting the SURROUND
BACK channels to them.
Front Height
Room2

Automatic Power Control

You can set the standby time for the system to be
turned off. The default setting value is 4H.
Network Standby Control
You can set whether the main unit can be turned on
Menu item
ON
function.
OFF
function.
44
After you have installed this receiver and connected
settings for the optimum sound acoustics according to
your listening environment, you should also adjust the

Auto Setup

Description
sound automatically. Auto Setup provides the optimum
listening environment for the listening position in your
room. When performing the Auto Setup procedure,
Level setup procedures.
1
2
Description
Setting the Speaker Setup
this receiver.
If your subwoofer has a volume control and
crossover frequency, set the volume halfway
and set the crossover frequency to the
Connect the supplied microphone to the SETUP