Room 2 Remote Controls; Remote Control Operation Range; Loading Battery - Sherwood Newcastle R-871 Operating Instructions Manual

ROOM 2 Remote Controls

This remote control unit is an additional remote control unit for the ROOM 2 source playback only.
• You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with
the universal remote control unit.
• For details on ROOM 2 operation, refer to "ROOM 2 SOURCE PLAYBACK" on page 46.

LOADING BATTERY

Remove the cover.
1

REMOTE CONTROL OPERATION RANGE

• Aim the ROOM 2 remote control(or the
universal remote control) at the IR receiver
installed in another room.(For details, refer to
"CONNECTING MULTI-ROOM SYSTEM KIT"
on page 13.)
• When you operate the ROOM 2 function in the
main room, aim the universal remote control
(or the ROOM 2 remote control) at the remote
sensor of this receiver.
Load the battery(CR2025) matching
2
the polarity.
• Remove the battery when it is not used for a long
time.
28