Setting The System Setup - Sherwood R-774 Operating Instructions Manual

R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 53

SETTING THE SYSTEM SETUP

Amp Assign
BACK
Subwoofer mode
HDMI Audio Output
Tone Control
Bass
Treble
Cinema EQ
Momentary OSD
Save/Recall
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item, then press the CURSOR RIGHT(▶)
button to enter its setting menu.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to set the selected item as desired, then press the ENTER
button.
All manuals and user guides at all-guides.com
• AMP Assign : To assign the surround back channels' power
NEXT
• Subwoofer Mode : To select the desired subwoofer mode.
• HDMI Audio Output : To output the digital audio signals from the
• Tone Control : To adjust the tone (bass and treble) as desired.
• Cinema EQ : To select the desired cinema EQ mode.
• Momentary OSD : To turn on or off the OSD that shows the
• Save/Recall : To memorize all the OSD menu setting values into
53
amplifier correctly depending on how to use the
speakers.
HDMI MONITOR OUT connector.
status corresponding to each operation
momentarily.
memory or to recall the memorized setting values.
• Then the setting value is marked with "
• When the CURSOR LEFT(◀) button is pressed on a
setting menu, the previous menu will be returned to.
OK ".