Sherwood Newcastle R-871 Operating Instructions Manual page 38

Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REFERENCE 1", "REFERENCE 2")
and recall the memorized whenever you want.
After performing the steps ①~④ in "Adjusting the current channel level" procedure on page 36,
1
press the (MEMORY/) ENTER button.
Select the desired one of REFERENCE 1
2
and REFERENCE 2.
• If the preset memory disappears, perform the
above step ① again.
Recalling the memorized channel levels
Press the CHANNEL LEVEL button.
1
• "REFERENCE 1" (or "CALIBRATE") is
displayed for several seconds.
• If the channel level mode display disappears,
press this button again.
• The "1" of "REFERENCE 1" indication flickers for
several seconds.
Confirm your selection.
3
• The adjusted channel levels have now been
memorized into the selected memory.
Select the desired one of REFERENCE 1
2
and REFERENCE 2.
• Then the channel levels memorized into the
selected preset memory are recalled.
37