Sherwood Newcastle R-871 Operating Instructions Manual page 68

When selecting the DOLBY VIRTUAL SPEAKER
• You can select the speaker layout to be used actually for each Dolby Virtual Speaker mode.
Note:
• The speaker layout settings are valid only when listening in a Dolby Virtual Speaker mode.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DOLBY VIRTUAL SPEAKER,
1
then press the ENTER button.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired Dolby Virtual Speaker mode.
2
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired speaker layout.
3
Note:
• When the speakers are set to "NONE", the corresponding speaker layouts cannot be selected.
4
Repeat the above steps ② and ③ to select the desired speaker layout for another Dolby
Virtual Speaker mode.
When selecting the Dolby Virtual Speaker Reference
mode
2 SPK : When using 2 front speakers only.
3 SPK : When using 2 front and center speakers.
When selecting the Dolby Virtual Speaker Wide mode
2 SPK : When using 2 front speakers only.
3 SPK : When using 2 front and center speakers.
4 SPK : When using 2 front and 2 surround speakers.
5 SPK : When using 2 front, center and 2 surround speakers.
67