Siemens SIMOTION Equipment Manual page 76

Interfaces
4.7 Power supply
Note
Ground potential and housing (PE) are connected internally with low impedance.
Note
The 24 V DC cable must be approved for temperatures of up to 75 °C.
The maximum permissible cable length is 10 m.
Interface characteristics
Table 4-23
Features
Connector type
Number of connectable conductors
Connectable cable types and conductor cross-sec‐
tions
Stripped length
Tool
Tightening torque
Max. current carrying capacity, incl. loop-through
Max. cable length
76
Interface X124
Rigid
Flexible
Flexible, with wire-end ferrule without plas‐
tic sleeve
Flexible, with wire-end ferrule with plastic
sleeve
AWG / kcmil
Type
4-way screw-type terminal
1
0.2 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm²
0.2 mm² ... 1.5 mm²
22 ... 12
6 ... 7 mm
Screwdriver 0.5 x 3 mm (M2.5)
0.4 to 0.5 Nm (3.5 ... 4.4 lbf in)
20 A (15 A per UL/CSA)
10 m
Equipment Manual, 07/2021, A5E33446720B
SIMOTION D410-2