Omron NX Series User Manual page 73

Servers
*1. Use a CJ-series EtherNet/IP Unit with a unit version of 2.1 or later.
Also, mount the EtherNet/IP Unit to an NJ-series CPU Unit with unit version 1.01 or later, and use Sysmac
Studio version 1.02 or higher.
Refer to the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501) for information on version up-
grades.
*2. Mount to an NJ-series CPU Unit.
NX-series CPU Unit Hardware User's Manual (W535)
Connection
Connections to BOOTP server, DNS
server, or NTP server
2 System Configuration
Connection method
Use the built-in EtherNet/IP port or a port on an
*1
EtherNet/IP Unit.
2
2-7