Omron NX Series User Manual page 149

User program
Controller Configurations and Setup
Event log
Clock data
Values of variables
*1. If the initial value setting is blank, the initial value for the data type is used. For example, the initial value
of BOOL data is FALSE and the initial value of integer data is 0. Refer to the NJ/NX-series CPU Unit
Software User's Manual (Cat. No. W501) for details on the initial values.
NX-series CPU Unit Hardware User's Manual (W535)
Type of data
No Retain attribute
Retain attribute
6 Inspection and Maintenance
Power turned ON
Battery No Battery
Values before power interruption will be
retained by the built-in non-volatile
memory.
Values before Values before
power interruption power interruption
will be retained. will not be re-
tained.
Correct values Illegal values
*1
Initial values Initial values
Values before
Initial values
power interruption
will be retained.
*1
*1
6
6-11