Omron NX Series User Manual page 103

NX-series
Controller
EtherCAT
Slave Terminal, etc.
Fuses, relays, timers, etc.
(Do not install devices that
generate heat or power
equipment.)
4-3-2
Preparations for Installation
We recommend using the following products to install the Unit on a DIN Track.
Name
35-mm DIN Track
End Plate
NX-series CPU Unit Hardware User's Manual (W535)
Output duct
Input duct
Terminal blocks
for PLC
Model
PFP-50N OMRON Corporation
PFP-100N OMRON Corporation
NS 35/ 7,5 PERF Phoenix Contact
NS 35/ 15 PERF Phoenix Contact
PFP-M OMRON Corporation
CLIPFIX 35 Phoenix Contact
Power duct
200 mm min.
Breakers,
fuses
Power
equipment
such as
transformers
and magnetic
relays
Terminal blocks for
power equipment
Manufacturer
•
Length: 50 cm
•
Material: Aluminum
•
Surface treatment: Insulated
•
Length: 100 cm
•
Material: Aluminum
•
Surface treatment: Insulated
•
Length: 75.5, 95.5, 115.5, or 200
cm
•
Material: Steel
•
Surface treatment: Conductive
•
Length: 75.5, 95.5, 115.5, or 200
cm
•
Material: Steel
•
Surface treatment: Conductive
Two End Plates are required for
each CPU Rack.
Two End Plates are required for
each CPU Rack.
4 Installation and Wiring
Remarks
4-13
4