A-1 Specifications - Omron NX Series User Manual

Appendices
A-3 Version Information
Refer to Version Information for NX-series Controllers in the NJ/NX-series CPU Unit Software User's
Manual (Cat. No. W501) for the relationship between the unit versions of NX-series CPU Unit and the
Sysmac Studio versions, and for the functions that are supported by each unit version.
A-3-1
Relationship between Hardware Revisions of CPU Units and
Sysmac Studio Versions
The following table shows how the hardware revisions of the NX-series CPU Units correspond to Sys-
mac Studio versions. Use the corresponding version of Sysmac Studio or higher if you use the Simula-
tor in Execution Time Estimation Mode. You cannot select the relevant hardware revision if you use a
lower version of the Sysmac Studio.
Model
NX701-££££ B
A-6
Hardware revision of CPU Unit Corresponding version of Sysmac Studio
1.50
NX-series CPU Unit Hardware User's Manual (W535)