Connecting To The Sysmac Studio - Omron NX Series User Manual

EtherCAT
Network Configuration
NX-series Power Supply Unit
CPU Rack
Built-in EtherNet/IP port
EtherCAT
For information on the system configuration of an EtherCAT network, refer to the NJ/NX-series CPU
Unit Built-in EtherCAT Port User's Manual (Cat. No. W505).
Configuration Units
 NX-series CPU Units
The Unit that serves as the center of control for a Machine Automation Controller. It executes tasks,
refreshes I/O for other Units and slaves, etc. The NX-series CPU Unit includes the NX701-££££.
Refer to 3-1 CPU Units on page 3-2 for the models and specifications of individual NX-series
CPU Units.
 NX-series Power Supply Units
The Unit that supplies power to a CPU Rack including an NX-series CPU Unit. AC type and DC
type are provided for the Power Supply Unit.
Refer to 3-3 Power Supply Units on page 3-11 for the models and specifications of individual NX-
series Power Supply Units.
Precautions for Safe Use
Do not use the Power Supply Units in the system beyond the rated supply capacity ranges.
Doing so may result in operation stopping, incorrect operation, or failure to correctly back up
required data at power interruptions.
NX-series CPU Unit Hardware User's Manual (W535)
NX-series CPU Unit
SD Memory Card
Built-in EtherCAT port
Slave Terminal
2 System Configuration
End Cover
EtherCAT slaves
ADR ADR
Servo Drive/encoder General-purpose
input slaves
2
slaves
2-3