Related Manuals - Omron NX Series User Manual

Versions
Versions
Hardware revisions and unit versions are used to manage the hardware and software in NX-series
Units and EtherCAT slaves. The hardware revision or unit version is updated each time there is a
change in hardware or software specifications. Even when two Units or EtherCAT slaves have the
same model number, they will have functional or performance differences if they have different hard-
ware revisions or unit versions.
Checking Versions
You can check versions on the ID information indications or with the Sysmac Studio.
Checking Unit Versions on ID Information Indications
The unit version is given on the ID information indication on the side of the product.
For NX701
The ID information on an NX-series NX701-££00 CPU Unit is shown below.
Note The hardware revision is not displayed for the Unit whose hardware revision is blank.
Checking Unit Versions with the Sysmac Studio
You can use the Sysmac Studio to check unit versions. The procedure is different for Units and for
EtherCAT slaves.
 Checking the Unit Version of an NX-series CPU Unit
You can use the Production Information while the Sysmac Studio is online to check the unit version
of a Unit. You can do this for the following Units.
Model
NX701-££££
34
ID information indication
Lot number Serial number
LOT No. DDMYY
PORT1 :
PORT2 :
Unit for which unit version can be checked
CPU Unit
Unit version
xxxx Ver.1.
HW Rev.
MAC address Hardware revision
NX-series CPU Unit Hardware User's Manual (W535)