Setting The Date And Time - Sharp AL-1661CS Operation Manual

INITIAL SETTINGS
8
Press the [ENTER] key.
9
Press the [ ] key (
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
Selection
"2:ENTRY MODE"
"STORED" will appear in the display.

SETTING THE DATE AND TIME

The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day"
can be selected for the order of display of the date.
Use the following procedure to set the date and time:
1
Press the [MENU] key.
2
Press the [ ] key (
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
Selection
"2:ENTRY MODE"
3
Press the [ ] key (
until "2:DATE&TIME SET" appears,
and then press the [ENTER] key
Selection
"2:DATE&TIME SET"
4
Enter the year, month, and day with
the numeric keys and then press the
[ENTER] key.
22
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
10
Press the [CLEAR ALL] key (
) and re-enter the number.
5
Enter the time with the numeric keys.
6
Press the [ ] key (
to select "AM" or "PM".
7
Press the [ENTER] key.
8
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key ( ) to exit.
) or [ ] key ( )
When 24-hour format is
selected, do not perform
this step.
).
Press the [CLEAR ALL]
key ( ) to exit.