Dialing And Transmitting; Direct Keypad Dialing; Rapid Key Dialing; Speed Dialing - Sharp AL-1661CS Operation Manual

DIALING AND TRANSMITTING

Once you have set the original (either in the RSPF or on the document glass), and have selected the desired
transmission settings, you are ready to dial the number of the receiving fax machine and transmit the original. You
can choose from one of the several ways of dialing that best suit your needs.

DIRECT KEYPAD DIALING

If the number of the fax you want to reach is not a Rapid key or Speed Dial number, use Direct Keypad Dialing to
manually enter it using the following procedure:
1
Confirm that you have correctly set
the original in the RSPF or on the
document glass. (See "SETTING THE
ORIGINAL" (p.51))
2
Enter the number of the fax machine
you want to send to by pressing the
numeric keys.

RAPID KEY DIALING

If the number you want to dial has been stored as a Rapid key number (See
"STORING NUMBERS FOR AUTOMATIC DIALING" (p.41)), you can dial it by
pressing the appropriate Rapid key as shown:

SPEED DIALING

If the number you want to dial has been stored as a Speed Dial number, you can dial it using the following
procedure:
1
Press the [SPEED/SEARCH] key and
then enter the two-digit number by
pressing the numeric keys (See
"STORING NUMBERS FOR
AUTOMATIC DIALING" (p.41)).
SPEED/ BROAD- RECEPTION REDIAL/
MEMORY SEARCH CAST MODE PAUSE
RESOLU- COVER 2-SIDE
TION CONTRAST SHEET REPORT TX
LINE STATUS SPEAKER
58
If it is not correct, press
the [CLEAR] key ( ) to
backspace and clear one
digit at a time, and then
enter the correct number.
If it is not correct, press
the [CLEAR] key ( ) to
backspace and clear one
digit at a time, and then
enter the correct number.
3
Check the display. If the number of the
receiving machine is shown correctly,
press the [START] key (
2
Check the display. If the name or
number shown is correct, press the
[START] key ( ).
).
01 02 03 04 05
10 11 12 13 14
06 07 08 09
15 16 17 18 SHIFT