Setting The Dial Mode - Sharp AL-1661CS Operation Manual

INITIAL SETTINGS

SETTING THE DIAL MODE

The machine can be used with both touch-tone and pulse telephone lines. Touch-tone uses tones of different
pitches for each numeric key, while pulse lines use a series of pulses. Your machine must be set to match the kind
of telephone line you are using: touch-tone or pulse.
1
Press the [MENU] key.
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "20:DIAL MODE" appears, and
then press the [ENTER] key.
Selection
"20:DIAL MODE"
4
Press the [ ] key (
to select the dial mode.
5
Press the [ENTER] key.
30
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
The selections are as
follows:
1:TONE
2:PULSE
6
Press the [CLEAR ALL] key ( ).
Press the [CLEAR ALL]
key ( ) to exit.