Setting The Date And Time - Sharp FO-3800M Operation Manual

Setting the Date and

Setting the Date and Time

Setting the Date and
Setting the Date and Setting the Date and
The date and time that appear in the display are printed at the top of each page
you transmit. Set the date and time by pressing the keys on the operation
panel as shown below. To correct a mistake, press the ST
cursor back to the mistake, and then enter the correct number.
Note: Note: Note: Note: The machine supports the year 2000. To program such a date, enter the Note:
last two digits; for example, the year 2000 is programmed by entering
"00".
Use the following procedure to set the date and time:
Step Step Step Step Step Press these keys Press these keys Press these keys Press these keys Press these keys
1 1 1 1 1
FUNCTION
ABC
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6
ENTER
7 7 7 7 7
ABC
8 8 8 8 8
9 9 9 9 9
ENTER
STOP
10 10 10 10
10
SUK 06 INITIAL LEO.p65
Time Time Time
Time
DEF
(example: 2000)
PQRS
(example: July)
JKL
(example: the fifth)
DEF
STOP
INITIAL SETTINGS
49
ST ST OP OP
STOP ST OP key to move the OP
Comments Comments Comments Comments Comments
"ENTRY MODE" will
appear in the display.
"ENTER YEAR" will appear
in the display.
Enter the last two digits of
the year. "ENTER MONTH"
will appear in the
display.
Enter the month (2 digits:
"01" for January, "02" for
February, "12" for
December, etc.). "ENTER
DATE" will appear in the
display.
Enter the day of the month
("01" to "31"). "PRESS
ENTER KEY" will appear
in the display.
"ENTER TIME" will appear
in the display.
Enter the hour (2 digits:
"01" to "12").
Enter the minute (2 digits:
"00" to "59").
The clock starts when you
press this button.
"STORED" will appear in
the display.
Press the ST STOP ST ST OP key twice OP OP
ST OP
to exit.
17/04/00, 13:15
Fax Setup
6
49 49 49 49 49